Contact us

UKU controller installation


Open Menu
Enne ostmist

UKU controller installation

Installation video

All UKU controllers come with several extra features
  • lights/ventilation and vaporizer control
  • door sensor
  • overheating protection
  • child lock
  • timer
  • UKU Wi-Fi controller also have a remote control option through the mobile app
The set includes
  • control panel;
  • main module;
  • temperature sensor;
  • door sensor;
  • temperature/door switch cable (197+197 in / 5+5 m; 2×28 AWG);
  • user interface cable (118 in / 3 m; 4×28 AWG).
Important things to know before installation
  • Only a qualified electrician may install the device.
  • Make sure that the building’s cables from the main switchboard to the desired location in the sauna have a sufficient cross-section.
  • In the case of an older building, pay attention to the condition of the connecting boxes and if possible, install a new cable from the switchboard to the sauna.
  • We recommend connecting the unit to the mains without an earth-leakage circuit breaker.
  • The cable connecting the main module with the stove must be heat-resistant (221°F / 105°C).
  • All the cables will connect to the main module.
Where should the control device be installed?
  • The control panel must be installed outside the steam room at the user’s eye level next to the door or according to the manufacturer’s recommendations.
  • Install the main module in a dry place that is easy to access. We do not recommend installing the main module in the sauna room. Doing so will be at your own risk. The main module should be installed in a place where the ambient temperature does not exceed 122°F /  50°C and relative humidity is not higher than 95%. The protection degree of the device is IP65.
  • If your control device supports the use of a Wi-Fi connection, make sure you install the main module where the appropriate reception is available.
Installation manual

From the installation manual, you will find detailed info on how to install the control panel, the main module, the door sensor and the temperature sensor. You will also learn how to connect your control panel to the lighting/ventilation system and the vaporiser and how to set up a mobile app connection.

Was that article useful?

Become a reseller

Interested in becoming a HUUM dealer? Fill out this form, and we will review your information and contact you to discuss a potential new partnership.

    Contact form